Moisture Proof / Insulation
FLUOROSURF forms a thin film with high moisture-proof, salt water resistant, water-proof, acid-proof, lithium battery electrolyte resistant, and water/oil repellent properties and other protection functions.
It has also high insulation resistance, low dielectric constant and other electric properties and is most appropriate for electronic component water-proofing, insulation protection and mounting printed circuit board moisture and water proof coating.
* High performance for anti humid, water proof.
* High resistant to lithium battery electrode
* High resistant to acid gas and liquid
* High insulation
* Low dielectric constant
* Non flammable liquid

I. Features:

1. The coating can be easily applied through simple dipping, spray cans, brushes, etc., and forms a special fluorine resin film after air drying at room temperature.

2. The coating film provides moisture resistance, waterproofing, acid resistance, resistance to corrosive gases, and possesses water-repellent and insulating properties. It strongly protects materials from corrosive substances and moisture intrusion.

3. The use of non-flammable solvents eliminates fire hazards and has low toxicity, maintaining a good work environment. It can pass inspections under fire safety regulations, occupational safety laws, PRTR laws, etc.

4. Drying time varies with film thickness, ranging from 5 seconds to 25 minutes at room temperature. No special equipment or space is required!

5. It can accommodate a wide range of film thicknesses (1 ~ 50 microns).

 

II. Applications:

1. Moisture-proof coating for printed circuit boards: Ideal as a replacement for urea and silicone.

2. Acid-resistant coating: Protects metal parts from corrosion by hydrochloric acid, sulfuric acid, sulfurous gas, and nitrous acid gas.

3. Saltwater-resistant coating: Offers excellent protection even against saline water.

 

III. Advantages:

1. Simple application process with quick drying time.

2. High moisture resistance (four times that of urea), effective even with thin films, allowing for lightweight solutions.

3. Low viscosity, does not contaminate the workplace.

4. The product has an almost permanent lifespan, ensuring no waste.

Comparison of related series:

series	Application / Feature	Film thickness (um)
FS-1610	Acid proof, Water /Oil Repellent, Protect contact point,	0.1-8
	Anti moisture film for Mounting Board, Acid proof,
FG-3030	Resistance for electrolyte , LED protect from acid gas Soft film	0.1-40
	It forms soft film for Mounting board.
	Anti moisture film for Mounting Board, Acid proof,
FG-3650	Resistance for electrolyte , LED protect from acid gas Soft film	0.1-40
	It forms soft film for Mounting board.
FG-5040	Hard film (Pencil Hardness 3H) Anti acid	0.1-10

FG-3030 Video

FluoroTechnology: http://www.fluorotech.co.jp
Fill out the form to contact us!