I. High-Adhesion Fluoropolymer Coating Agent FG-5010

1. Various materials such as glass, resin, and metal, after room temperature drying and chemical bonding, form a high-adhesion, high-hardness (pencil hardness 6H-9H) water and oil repellent film. (For materials other than glass, a special primer (Primary coat) provided with the product is required for pre-treatment coating).

2. Surfaces coated with this agent can reduce the adhesion of fingerprints and various pollutants, and pollutants can be easily wiped off. Since it is a high-adhesion film, the functionality remains even after pollutants are wiped off with a thin tissue.

3. The dynamic friction coefficient of the surface (μ=0.09 or less) is low, resulting in a dry film with a lubricated surface.

4. A thin film of approximately 0.1μ for the substrate + 10-30nm for FG-5010 does not compromise the appearance of the original material.

II. Pollution Adhesion Reduction and Anti-Reflective Coating Agent FG-5040

1. Forms a water and oil repellent film with a pencil hardness of 3H, reducing the adhesion of pollutants.

2. Functions as a moisture-proof and rust-proof coating.

3. As the film has a low refractive index (1.39), it can also be used as a low-reflective surface coating.

4. When applied to transparent plates and lenses, it can increase light transmittance by 3-4%. The effect is significantly enhanced in the case of multi-lens assemblies. (For example, stacking 5 lenses can increase light transmittance by 30%).

III. Water/Oil Repellent Applications
Fluoride resin film formed on the surface repels water and oil strongly.
It constitutes a barrier against grease (prevents its bleeding), prevents water and oil from diffusing or attaching and protects surfaces from fouling. The fluoride resin film provides diversified merits.

Comparison of related series:

Series	Application / Feature	Water contact angle
FS-1610	Oil Barrier, Resin barrier, Flux Barrier , High Contact Angle	116°
FG-5083	Silane coupling . High Adhesion to glass and metals. Low friction	110°
FG-5093	High Adhesion to metal surface, Low friction	110°
FG-5040	Better hardness and adhesion.	105°

IV. AFP (Anti Finger Print) / Anti Fouling
By coating surfaces with this agent, fingerprint and other stains attaching to those surfaces decrease and attached stains can be easily wiped away. The high adhesion of the film keeps functions after the stains are wiped away with tissue paper or the like. 
Coefficient of dynamic friction of the surface is low (μ = 0.09 or less) and provides dry lubricating surface.
 

Series	Application / Feature	Solvent
FG-5080	Anti fouling, Low friction ,	Non flammable
	High Adhesion, High abrasion resistance
	It’s possible to apply by wet coating or vapor deposition
FG-5083	Anti fouling, Low friction ,	Non flammable
	High Adhesion, High abrasion resistance for wet coating
FG-5093	Anti fouling for metal. High repellency	Non flammable
	Also it works as release agent for mold
FS-2050	Reasonable, PFPE type	I.P.A
	Replacement from C8 Silane coupling

 

V. Releasing Agent

Feature: 
1. The sticking force of molding resin is reduced on the surface that is coated with FLUOROSURF and It is powerful way to release even in the molding of complex and detailed shapes that can not be released by ordinary releasing agents.

2. It reacts with the molding material and strongly sticks to it so that continuous mold release is possible.

3. It forms thin film of nanometer level. Mold release of accurate shape is possible in the microscopic molding of more precise than microns order.

4. The releasing agent component is not transferred and thus cleaning of the molded part is not necessary.

5. When performance degrades the re-coating can be done by a simple over-recoating. It is no necessary to remove old film.

6. The releasing agent uses nonflammable solvent. There is no legal restrictions and it can be used safely.

Comparison of related series:

Series	Recommend object	Contact angle (oil)	Film thickness (nm)	Solvent
FG-5083	Glass mode	68-70°	10-20	nonflammable
FG-5093	Metal mode	68-70°	10-20	nonflammable

 

VI. Moisture Proof / Insulation
FLUOROSURF forms a thin film with high moisture-proof, salt water resistant, water-proof, acid-proof, lithium battery electrolyte resistant, and water/oil repellent properties and other protection functions. It has also high insulation resistance, low dielectric constant and other electric properties and is most appropriate for electronic component water-proofing, insulation protection and mounting printed circuit board moisture and water proof coating.
* High performance for anti humid, water proof.
* High resistant to lithium battery electrode
* High resistant to acid gas and liquid
* High insulation
* Low dielectric constant
* Non flammable liquid

Series	Application / Feature	Film thickness (um)
FS-1610	Acid proof, Water /Oil Repellent, Protect contact point,	0.1-8
	Anti moisture film for Mounting Board, Acid proof,
FG-3030	Resistance for electrolyte , LED protect from acid gas Soft film	0.1-40
	It forms soft film for Mounting board.
	Anti moisture film for Mounting Board, Acid proof,
FG-3650	Resistance for electrolyte , LED protect from acid gas Soft film	0.1-40
	It forms soft film for Mounting board.
FG-5040	Hard film (Pencil Hardness 3H) Anti acid	0.1-10

FG-5084 Video

FluoroTechnology : http://www.fluorotech.co.jp
Fill out the form to contact us!